Tapered roller bearings 32206B
Bearing number : 32206B
Size (mm) : 30x62x21.25
Brand : Timken
Bore Diameter (mm) : 30
Outer Diameter (mm) : 62
Width (mm) : 21,25
Bearing dimensions and specification in Timken catalogue:
d - 30 mm
D - 62 mm
T - 21,25 mm
B - 20 mm
C - 17 mm
R - 1 mm
r - 1 mm
Weight - 0,3 Kg
Dynamic load rating radial (C) - 55,8 kN
Calculation factor (e) - 0,56
Calculation factor (Y) - 1,07
Amazon.com: Timken 32206M Wheel Bearing: Automoti
Timken Wheel Bearings are designed to help the wheels of the vehicle spin smoothly and quietly. These bearings allow wheels to rotate with minimal friction and support the vehicle's weight. They are designed to maintain proper oil clearance, allowing a thin film of oil to form between the moving parts.
Timken Bearings | etrailer.c
Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal Features: Kit includes One inner bearing and race One outer bearing and race Grease seal Cotter pin - for standard spindle applications Tang washer - for EZ-Lube spindle applications Outer Bearing. Bearings. Standard Bearings. Bearing Kits. 3500 lbs Axle. etrailer. Bearing L44649 and L68149
Bogus Bearings Look More Real Than the Real On
A recent onslaught of bogus after-market bearings in China has created a major headache for legitimate bearing makers like SKF and Timken, who say that it's often very difficult to distinguish the fakes from the non-fakes. Counterfeiters are getting very good at reproducing the original markings ...
TIMKEN METRIC TAPERED ROLLER BEARINGS - kramp.c
TIMKEN® METRIC TAPERED ROLLER BEARINGS 2 TIMKEN® METRIC TAPERED ROLLER BEARINGS PART-NUMBERING SYSTEMS ORIGINAL ISO PART-NUMBERING 3 2 2 18 Tapered roller bearing Width series Diameter Bore code The original metric part-numbering system for tapered roller bearings was based on the ISO 15 dimensional plan for radial bearings. ISO 355 PART ...
Part Numbering Systems - Timken C
In all the part numbering systems the term “bearing series” is used to describe bearings having the same basic internal geometry (e.g. roller size, included inner race and outer race angle). ... The original system developed by The Timken Company was based on a family of bearings designed around a common roller.