Tapered roller bearings 3778/3720
Bearing number : 3778/3720
Size (mm) : 47.625x93.264x30.162
Brand : Timken
Bore Diameter (mm) : 47,625
Outer Diameter (mm) : 93,264
Width (mm) : 30,162
Bearing dimensions and specification in Timken catalogue:
d - 47,625 mm
D - 93,264 mm
T - 30,162 mm
B - 30,302 mm
C - 23,812 mm
R - 6,3 mm
r - 3,3 mm
a - -8,1 mm
Da - 88 mm
db - 67 mm
da - 55 mm
Db - 82 mm
Aa - 1,9 mm
Ab - 0,9 mm
Weight - 0,88 Kg
Basic static load rating (C0) - 153 kN
Factor (G1) - 49,9
Factor (G2) - 14,5
Factor (Cg) - 0,0233
Factor (K) - 1,73
Basic dynamic load rating (C90) - 29,3
Basic dynamic load rating (Ca90) - 17
Basic dynamic load rating (C1) - 113 kN
Calculation factor (e) - 0,34
Calculation factor (Y) - 1,77
Bearing 3778/3720 Timken stock with low price - seeqpod.c
Catalogue,Brandslist,,Bearing 3778/3720 Timken. Bearing 3778/3720 Timken Shielded bearings have a storage life of five years and a further two years operational life following installation. Wash all bearing parts with a noncontaminating solvent. Lightly pack the bearings with grease applying a 33% fill by volume into the bearing and housings.
TIMKEN 3778-3720-B tapered bearings with Flange - Nodes .
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3778-3720-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings. Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring).
Amazon.com: Timken 3720 Wheel Bearing: Automoti
Timken Wheel Bearings are designed to help the wheels of the vehicle spin smoothly and quietly. These bearings allow wheels to rotate with minimal friction and support the vehicle's weight. They are designed to maintain proper oil clearance, allowing a thin film of oil to form between the moving parts.
3778/3720 TIMKEN bearin
In 1899, TIMKEN group founder Mr. Timken Henry invented a taper Roller Bearings applied to axle field at that time, that is the tapered roller bearing, 3778/3720 TIMKEN then the company was established.It has 52 factories and 81 sales offices, 9 technology and engineering center and 14 distribution and service center, spread all over the world in 29 countries and regions.
Timken® Bearings for Every Phase of the Food Process Flo
If bearing rust or re-greasing is concerning you, talk to us about options to take those worries away.” Bearings for All Stages of Food and Beverage Processing. Timken bearings for food and beverage processing equipment typically cost less to own than original bearings due to longer service life and less maintenance.