Angular contact ball bearings E2.3308A-2Z
Bearing number : E2.3308A-2Z
Size (mm) : 40x90x36.5
Brand : SKF
Bore Diameter (mm) : 40
Outer Diameter (mm) : 90
Width (mm) : 36,5
Bearing dimensions and specification in SKF catalogue:
d - 40 mm
D - 90 mm
B - 36,5 mm
C - 36,5 mm
a - 53 mm
d1 - 50,8 mm
r1 min. - 1,5 mm
r2 min. - 1,5 mm
D1 - 80,5 mm
da min. - 49 mm
da max - 50,5 mm
Da max. - 81 mm
ra max. - 1,5 mm
Weight - 0,93 Kg
Basic dynamic load rating (C) - 64 kN
Basic static load rating (C0) - 44 kN
Fatigue load limit (Pu) - 1,86
Limiting speed - 7500 r/min
Deep groove ball bearings - 6208-2z - skf.c
In addition to the information provided on this page, consider what is provided under Deep groove ball bearings. For information on selecting the appropriate bearing for a given application, and interpreting the data on this page, refer to Bearing selection process. For general information on rolling bearings, refer to General bearing knowledge.
Where are your bearings coming from? - skf.c
real SKF bearing – but your machine will! Fig. 1 Fig. 2 Fig. 3 Fig. 1. Fresh out of “production line” the Fig. 4 counterfeit bearings looks good on the surface. Fig. 2 and 3. The photos shows the condition of a counterfeit bearing used for less than 40 hours in a crusher application. A second bearing was just in black pieces. Fig. 4.
E2.6004-2Z/C3 20x42x12mm SKF Energy Efficient Deep Groove .
E2.6004-2Z/C3 20x42x12mm SKF Energy Efficient Deep Groove Ball Bearing. | eBay! E2.6004-2Z/C3 20x42x12mm SKF Energy Efficient Deep Groove Ball Bearing. | eBay! ... New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless ...
SKF Bearings - Bearing Parts & Supplies - Grainger .
Axial (thrust) bearings support loads parallel to the axis of the shaft, such as those exerted by a table supporting a weight. Radial bearings support rotating wheels and other applications where the force of the load is perpendicular to the shaft. Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads.