INSOCOAT cylindrical roller bearings, single row NU 1030 M/C3VL2071
Bearing number : NU 1030 M/C3VL2071
Size (mm) : 150x225x35
Brand : SKF
Bore Diameter (mm) : 150
Outer Diameter (mm) : 225
Width (mm) : 35
Bearing dimensions and specification in SKF catalogue:
d - 150 mm
D - 225 mm
B - 35 mm
D1 - - 198 mm
F - 169.5 mm
s - 4.9 mm
r1,2 - min. - 2.1 mm
r3,4 - min. - 1.5 mm
da - min. - 157 mm
da - max. - 167 mm
db - min. - 173 mm
Da - max. - 215 mm
ra - max. - 2 mm
rb - max. - 1.5 mm
Basic dynamic load rating - C - 205 kN
Basic static load rating - C0 - 300 kN
Fatigue load limit - Pu - 33.5 kN
Reference speed - 3200 r/min
Limiting speed - 5000 r/min
Calculation factor - kr - 0.1
Mass bearing - 4.9 kg
SKF Deep Groove Ball Bearing, Double Sealed, Steel Cage .
The SKF deep groove ball bearing is a double-sealed ball bearing with C3 clearance and has a deep-groove geometry for high speeds and supporting both radial and axial loads. This bearing has C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal expansion.
6301 skf bearing | eB
Find great deals on eBay for 6301 skf bearing. Shop with confidence. Skip to main content. eBay Logo: ... 1pcs Original Used Good SKF 6301-2RS1 Bearing #E-KG GY. Brand New. $6.80. From China. Buy It Now. Free Shipping. SKF 6301-ZTBH Deep Groove Ball Bearing 6301ZTBH 12 x 37 x 12 mm Steel Seal on 1.
SKF/FAG bearings | Adventure Rid
Order what l thought was a set of SKF bearings for my R100GS gearbox (was advertised as SKF) from a german company but have been sent a set of FAG bearings all look the same apart from the the bearing that sits behind the circlip groove on the output shaft (need to have one machined on mine) the old NTN bearing has 5 roller balls and the new FAG 6 smaller ones .
SKF Bearings - Bearing Parts & Supplies - Grainger .
Ball bearings are used with applications that have high axial loads and low-to-moderate radial loads. Mounted bearings (bearing units) have a bearing inside a housing unit to ensure a secure fit and mount. Sleeve and clip bearings support high loads, have no moving parts, and require lubricant to allow the shaft to turn smoothly.